latihan ccna 7.2.6

Lab 7.2.6 Configuring a Wireless Client
Objective
• Install and configure a driver for a wireless USB NIC for a wireless client computer.
• Determine the version of the driver installed and check the Internet for updates.
Background / Preparation
In this lab you will install a driver for a wireless USB NIC in a computer. The driver is a type of software that
controls the wireless NIC. The driver comes on a CD with the NIC or can be downloaded from the Internet.
Many manufacturers require that the driver is installed before the adapter is connected. The procedure
described in this lab is for a Linksys USB 802.11g wireless NIC, but is similar to others. You should always
follow the procedure recommended by the wireless NIC manufacturer.
The following resources are required:
• Windows XP-based computer with an available USB port
• Wireless USB NIC and associated driver
• Administrator rights to install the driver
• Linksys WRT300N with wireless access configured from previous lab

Step 1: Install the wireless NIC driver
a. Insert the CD that contains the wireless NIC driver into the CD/DVD drive and install the driver
according to the manufacturer recommendations. Most USB devices require that the driver be
installed before the device is physically attached. Note that you may do part of the installation process
now and part of it after the wireless NIC is installed